DIY 35mm Slide and Negative copying

Like many of you, I have a large collection of 35mm slides and negative film that I have taken over the years that are currently pretty much invisible. I ditched my slide projectors with the last house move (they were 240V and hadn’t been used in 20 years!) and so all the slides were stored in their boxes for some sort of future viewing! In my early years I took a lot of black and white films and so have all those negatives in those paper holders filed away. I’m not saying that these will be great for stock photo images, but there is a lot of my life stored in those boxes! So I’ve always wanted a way to scan them to digital and perhaps pick the best to share with family and friends.

About 7 or 8 years ago, I bought a Nikon 35mm film scanner – very expensive at around $500 and pretty slow (although extremely good) at scanning the film. I scanned perhaps 200 of my slides, but it was hit and miss which ones I picked. Then I sold it and more or less got about the same money, so it wasn’t that expensive an exercise. But apart from that, I kept it in my mind that I should do something. I know there are overseas companies that take boxes of slides and films and return them with digital scans, but I always thought I could do it myself with a bit of effort – and perhaps do a better job! So when I saw the Amazon prime sale of a Wolverine Titan scanner with a 20Mpixel capability for only $100, I thought my prayers had been answered!

But – when it arrived, it was disappointment time. First, I have quite a number of plastic mounts for my slides. I think I used Ektachrome and the film was returned in strips that you had to mount. The plastic mounts were just too big for the slide holder and so each one had to be inserted on its own – no pushing slide after slide through the machine. Ok, I guess I could work with that, but the quality of the scans was pretty poor. Here is a 100% view from a section of a 20Mpixel scan from the Wolverine followed by one from the device I am about to describe:

Example of a scan from a Wolverine Titan film scanner
Scan of 35mm slide from Wolverine Titan film scanner
Example of scan from my DIY film scanner
Scan of 35mm slide from my DIY film scanner

So enough preamble – what is this device? My Sony camera plus 90 mm macro lens! I saw quite a number of posts and videos on the web about holding the slide in a clip in front of the computer monitor and using a camera on a tripod, but it all looked very “heath robinson”, and so I set about building something that would be reliable, accurate, quick to change slides, be able to take negative film as well, and give me as good a quality as I could get. The result of this design challenge is here in all its glory!

DIY film and slide scanner using a DSLR and macro lens on a wooden mount

I’m OK at woodwork, so that is how I decided to make this – it could be built with plastic parts, or if you have a friendly uncle with some woodworking tools, I made it in about 3 hours or so. What is behind that white card at the top of the image?

DIY film and slide scanner using a DSLR and macro lens on a wooden mount
Flashgun on the floor pointed up at the white card to illuminate the slide or negative

The whole thing is about 35 cm by 25 cm or so and I made it with things I had around – offcuts of previous carpentry projects, a quick release mount for the camera L-plate etc. but the main thing I bought was the slide and film holder. I wanted something that was well made, was easy to clean, quick to remove and fit with new slides etc. and I found it with the Plustek slide and film holder kit. This is made for an expensive Plustek scanner and cost $29 – but it served my purposes completely.

https://amzn.to/2ydyOWb
Plustek slide holder in my DIY slide copying rig

Each slide position is spring loaded to allow you to quickly clip the slide into place and my Kodachrome and Extachrome plastic mounts fit well in the holder. Each opening has a little lug cut out in the center of the frame on the bottom edge of the holder which I used to center the slide over the lighting cutout:

DIY film and slide scanner using a DSLR and macro lens on a wooden mount
Small bolt aligns with the cutout on the bottom edge of the slide holder to center the image

Once these arrived, I was able to do a rough mounting of how it would all fit together. I wanted the camera to be solid and fixed and so I screwed a tripod mount into place at the end of the baseboard:

DIY film and slide scanner using a DSLR and macro lens on a wooden mount
Securing the camera to the baseboard

With the camera firmly mounted, I was able to move the film holder backwards and forwards until I had the film plus some of the mount visible in the camera screen. With such a large resolution on the camera, there is no downside in taking a smaller image of the slide by giving yourself more room to line it up accurately. So to avoid making this too difficult a project, don’t try to zoom in too closely to the actual image itself.

DIY film and slide scanner using a DSLR and macro lens on a wooden mount
Slide image from the camera showing the space around the film itself

As you can see here, I didn’t really mean to have this off-center vertically, but the tolerances of my woodworking resulted in a slight deviation from the plan. Because I wasn’t trying to be too close to the film itself, it didn’t matter!

Once I had found the distance from the film to the camera, I worked out, by trial and error, how high the slide mounting should be. I then cut a 4 x 5cm hole in the wood using an oscillating cutting tool. Drilling holes in the corners and using a jigsaw would work as well:

DIY film and slide scanner using a DSLR and macro lens on a wooden mount
Cutout for the light to hit the back of the slide or negative

This the view from the rear showing the cutout and the bolt that aligns the slide in the frame. Then I made the runners themselves. These are simple pieces of wood with an L-shape groove cut out of them using a router.

DIY film and slide scanner using a DSLR and macro lens on a wooden mount
Cutout in pieces of wood to hold the slide and film mount in place

I cut a bit deeper in the top one to allow the film holder to rise up slightly over that centering pin. There is a little bit of play but not too much as I wanted the slide to be held vertically to keep the focus as good as possible.

I can quickly slide out this holder and fit new slides into it and then take shots of those four, or exchange it with the 6 shot film holder:

DIY film and slide scanner using a DSLR and macro lens on a wooden mount
35mm negative holder in the film copying rig

For lighting, I decided that the easiest approach was to have a white card (a bit of mount from a picture frame) at 45 degrees with a flashgun and remote trigger laying on the floor under the table. As you can see, I can sit this on a glass topped table and so I’m investigating simply laying the card at 45 degrees on the top of this piece of wood above and simply have the flash under the glass table.

With the flash underneath the rig, I have no issues with having to shield the lens from the flash, and with a manual flash setting, my trigger is a very simple one as well. It just triggers the flash, no more.

My early experiments on exposure aimed to produce a pure white, just over-exposed file when no slide is in the opening. As I take this as a raw image, I can over-expose more than that and bring the brightness back in any pure white bits of the slide. With ISO 100 (for minimum noise in the shadows), I used 1/160th second at F9 with the flashgun on 1/4 power. I’m using an old Canon 550EX speedlite for this with Phottix triggers. I use a 2 second delay on the camera shutter to minimize any chances of tremors when I take the shot. That aperture should give me a sharp image even with a slight bow in the negative or slide. I don’t think I will need to refocus for each shot – the rig is stable enough that the slide to camera distance will be very similar from shot to shot.

As you can see, I used screws so that I could readjust if necessary, but so far, there has been no need for that. I think that pretty much completes my explanation of how it works – if you have any further questions, please let me know in the comments below! Now on to some copying – perhaps there is a great historic stock photo in there!

(Visited 414 times, 1 visits today)

17 Responses

  1. Kevin Hellon says:

    Ingenious!

  2. Vlad Savin says:

    Very well done. I liked the photo with a big beautiful house. What kind of place is it?

  3. gameover2012 says:

    Hi Steven,
    I have the same problem of yours with my old slides (my father’s inheritance). I solved it with an Epson perfection v550 scanner (a bit more of $200 )
    You have to discard the plastic frames, but you scan a set of slides at once! The result seems very very good! Please have a look here at this digital copy (reduced to 800 pixels width from the “original” 6408×4091 pixels) of a slide of the year 1952 https://luisafumi.com/dia005-800.jpg
    Cheers
    Luisa

    • Steven Heap says:

      Yes, I have an old Epson Perfection 1650 that does very reasonable scans of slides. But there is no longer a Windows 10 driver for it, although a company called Vuescan makes a program to scan documents and films that includes drivers. It is fiddly though and if you have to remove the plastic mounts as well, that doubles the hassle! It was pretty slow to scan as well although the results were good. With my new rig, I scanned 30 slides in no more than 15 minutes and they are all pretty easy to correct in Lightroom.
      Steve

  4. gameover2012 says:

    With my Epson I can scan – if I remember right – 16 slides in less than 2 minutes. There is also the possibility to scan together 4 slides with frame, it seems at least equivalent.

    • Steven Heap says:

      I’m sure you are right. Mine is an old one that only does slides down a narrow section of the scan area. Certainly I found it slow and annoying plus the application to get the drivers was around $70. But I won’t recommend changing your approach if it is working for you!
      Steve

  5. Ray F. says:

    Steve….excellent project with the slider …!! I also have loads of 35 Mm slides to scan…since been taking pictures since 1985…!!!. But just wondering why you say they won´t be any good to agencies ..???
    Cheeeerrrssss…!!!

    • Steven Heap says:

      Hi Ray
      I’ve not scanned many slides so far and so can’t give much of an answer about their suitability for modern stock. I’m taking the view that there is a market for images from the 1970s and 1980s, but they need to show something interesting about that time period. The image I showed in the article about the French Chateau is unlikely to be interesting, because it looks exactly the same now (as far as I know) and so a grainy 35mm slide of something that can be photographed in high resolution detail is unlikely to get many sales. Time will tell whether I come across ones that are unusual or interesting because of when they were taken.

      Steve

I'm always interested in what you think - please let me know!